Ethan Rhodes
A tidy bedroom starts with a well-made bed, and hospital corners, or military corners, are a great way to achieve a neat and crisp look. They are also easy to do and will ensure your sheets don't come undone during the night. With just a few simple steps, you can transform your bed into a comfortable and inviting space that promotes a good night's sleep. So, whether you're looking to improve the appearance of your bedroom or simply want to enjoy the comfort and security of a properly made bed, learning how to do hospital corners is a valuable skill.
| Characteristics | Values |
|---|---|
| First Step | Lay a flat sheet on the bed so it hangs down evenly on all sides |
| Second Step | Tuck the end of the sheet in at the foot of the bed |
| Third Step | Hold the edge of the sheet 12 inches (30 cm) from the bottom and fold it on top of the mattress to form a crease at a 45-degree angle |
| Fourth Step | Tuck the excess sheet hanging down by the corner under the mattress |
| Fifth Step | Fold the angled sheet down and tuck in the side |
| Sixth Step | Repeat the same folds on the other side of the sheet |
| Seventh Step | Pull the sheet tight to smooth out any wrinkles |
Explore related products
What You'll Learn
Lay a flat sheet on the bed
To start making your bed, lay a flat sheet on top of your mattress. Make sure the sheet is centred and aligned with the head of your bed, with equal amounts of fabric hanging down from the sides and the foot of the bed. If you have a fitted sheet, put it on your mattress first, followed by the flat sheet. You can also add a blanket that you want to tuck in using hospital corners—simply lay it on top of the flat sheet.
When you're laying the flat sheet on the bed, it's important to ensure that it hangs evenly on all sides. Adjust the sides and bottom end of the sheet until you achieve a uniform look. If you're using a flat rectangular sheet, pay extra attention to the top edge at the head of the bed, making sure it hangs down symmetrically.
Once you have the flat sheet in place, you can begin the process of creating hospital corners. Start by tucking in the end of the sheet at the foot of the bed. Hold the edge of the sheet about 12 inches (30 cm) from the bottom and fold it onto the mattress, forming a crease at a 45-degree angle.
Now, tuck the excess fabric hanging down by the corner under the mattress. Finally, fold the angled section of the sheet back down and tuck in the remaining loose edge. Repeat this process for the other corner to achieve a neat and tidy finish.
Wilmington, NC: Hospital Availability and Healthcare Options
You may want to see also
Explore related products
Tuck in the end of the sheet
To start making your bed, lay a flat sheet on top of your mattress, ensuring that the top edge is aligned with the head of the bed. Adjust the sides and bottom end of the sheet so that an equal amount hangs down on all sides. If you have a blanket, you can place it on top of the sheet.
Now, you can begin to tuck in the end of the sheet at the foot of your bed. Grab the edge of the sheet about 12 inches (30 cm) from the bottom and fold it over the mattress to create a 45-degree angle crease. Tuck the excess fabric hanging down at the corner under the mattress. Repeat this process on the other side, making sure your folds are symmetrical.
Next, bring the angled section of the sheet back down and tuck in the remaining loose edge. Smooth out any wrinkles by pulling the sheet taut. If your bed is against a wall, you might need to undo one of the corners that is not against the wall and replicate the process on the other side.
Finally, run your hands over the sheet from the foot of the bed towards the head to ensure it is smooth and free of creases. Place your pillow at the head of the bed and add a quilt or duvet to complete the look.
Hospitals' Reporting of VRE and MRSA: Protocols and Challenges
You may want to see also
Explore related products
Fold the sheet at a 45-degree angle
To achieve a neat hospital corner, the key step is to fold the sheet at a 45-degree angle. This creates a crisp, angled fold that gives the bed a tidy and inviting appearance.
First, ensure your sheet is spread out evenly on all sides of the bed. Hold the edge of the sheet about 12 inches (30 cm) from the bottom and lift it up. Create a crease by folding the sheet at a 45-degree angle towards the centre of the mattress. This fold should form a neat triangle that points towards the head of the bed.
Next, tuck in the excess fabric at the corner. You can do this by slipping the corner under the mattress. The 45-degree fold you've created should now be angled towards the side of the bed.
To finish, bring the angled section of the sheet down and tuck in the remaining loose edge. Smooth out any wrinkles and ensure the corner is taut and crisp.
Repeat this process on the other side of the bed to achieve symmetry and a polished look.
Homer Alaska: Hospital Availability and Healthcare Services
You may want to see also
Explore related products
Tuck in the excess fabric
Once you have laid out your flat sheet and adjusted the sides and bottom end so that the same amount hangs down from the sides and foot of your bed, it is time to tuck in the excess fabric.
First, hold the edge of the sheet about 12 inches (30 cm) from the bottom. Then, fold the sheet on top of the mattress, forming a crease at a 45-degree angle. Next, tuck the excess fabric that is hanging down by the corner under the mattress. Now, fold the angled sheet down and tuck in the side. Repeat this process on the other side of the sheet to ensure it looks uniform. Simply hold the sheet 12 inches (30 cm) from the end, fold it at a 45-degree angle, and tuck in the small corner of excess fabric. Finally, bring the angled section of the sheet back down and tuck in the loose edge.
If your bed is against a wall, you may not be able to pull it out to gain access for tucking in the sheet on the wall side of the mattress. In this case, you can undo the final step of one of the corners that is not against the wall and try to replicate it on the other side.
Latest Update: Ladd Drummond's Hospital Discharge
You may want to see also
Explore related products
Smooth out any wrinkles
To smooth out any wrinkles, you can use your hand to gently glide over the surface of the sheet, starting from the foot of the bed and moving towards the head of the mattress. This helps to remove any visible wrinkles or creases, ensuring a neat and tidy appearance.
It is important to smooth out the sheets after each step of the hospital corner process. This includes smoothing the fitted sheet underneath and the flat sheet to eliminate any remaining wrinkles or creases. A helpful tip is to slightly lift the mattress and slide your hand between the mattress and the bed base to ensure the sheet is smooth and taut.
If you encounter any stubborn wrinkles, you can use a wooden spoon to smooth them out. Simply run the handle of the wooden spoon under the mattress to push and smooth the sheet.
Finally, once your hospital corners are complete and the sheet is tucked in, give the bed a final once-over by running your hands along the sheet to smooth out any remaining wrinkles on the top. This will help create a crisp and polished look.
Huntington Hospital: A Part of Cedars-Sinai?
You may want to see also
Frequently asked questions
Start by laying a flat sheet on your bed so that it hangs down evenly on all sides. If you have a fitted sheet, put it on your mattress first.
Adjust the sides and bottom end of the sheet until the same amount hangs down from the sides and foot of your bed. Hold the edge of the sheet 12 inches (30 cm) from the bottom. Fold it on top of your mattress so it forms a crease at a 45-degree angle. Tuck the excess sheet hanging down by the corner under the mattress. Then, fold the angled sheet down to tuck in the side.
If your bed is against a wall, undo the final step of one of the corners that is not against the wall and try to copy it on the other side.
Pull the sheet tight to smooth out the wrinkles when you’re finished. Run your hands over the sheet, starting from the foot of your bed and moving toward the head of the mattress. Try to get out as many wrinkles and creases as you can.
