Daybreak Parkway Station To Riverton Hospital: Distance And Travel Guide

how far is daybreak parkway station to riverton hospital

Daybreak Parkway Station and Riverton Hospital are two key locations in the Salt Lake Valley, and understanding the distance between them is essential for commuters, patients, and visitors. Located in South Jordan, Daybreak Parkway Station serves as a vital transit hub for TRAX light rail, connecting residents to various destinations across the region. Riverton Hospital, situated in Riverton, is a major healthcare facility providing critical medical services to the surrounding communities. The distance between these two points is approximately 7 miles, with travel times varying depending on the mode of transportation. Whether by car, public transit, or rideshare, knowing the exact distance and route options can significantly impact planning and efficiency for those traveling between Daybreak Parkway Station and Riverton Hospital.

Characteristics Values
Distance (Driving) Approximately 6.5 miles
Travel Time (Driving) Around 12-15 minutes (without traffic)
Distance (Public Transit) Varies based on route, approximately 7-8 miles
Travel Time (Public Transit) Around 30-40 minutes (including transfers)
Mode of Transportation Car, bus, or rideshare
Primary Route (Driving) Via Bangerter Highway (UT-154)
Public Transit Options UTA bus routes (e.g., 201, 218) with transfers
Nearest Transit Hub South Jordan Parkway TRAX Station (for connecting to Riverton)
Hospital Address 3741 W 12600 S, Riverton, UT 84065
Station Address 11402 S Grandville Ave, South Jordan, UT 84009
Elevation Difference Minimal (both locations are in the Salt Lake Valley)
Traffic Considerations Moderate traffic on Bangerter Highway during peak hours
Biking Distance Approximately 7 miles via local roads and bike lanes
Biking Time Around 30-40 minutes for an average cyclist
Walking Distance Not feasible (over 6 miles)
Walking Time Over 2 hours (not recommended)

shunhospital

Driving Distance & Time: Calculate direct route, traffic impact, estimated travel time by car

When calculating the driving distance and time from Daybreak Parkway Station to Riverton Hospital, it's essential to consider the most direct route, traffic conditions, and estimated travel time by car. The first step is to identify the shortest path between these two locations. Using mapping tools like Google Maps or Waze, you can determine that the most direct route typically involves traveling east on Pioneer Parkway, merging onto Bangerter Highway (UT-154), and then heading south on Redwood Road (UT-68) before reaching Riverton Hospital. This route is approximately 8.5 to 9 miles long, depending on the exact starting and ending points.

To calculate the estimated travel time, factors such as time of day, day of the week, and current traffic conditions play a significant role. During off-peak hours, such as early morning or late evening, the drive can take around 15 to 20 minutes. However, during peak traffic hours, particularly in the morning (7–9 AM) and evening (4–6 PM), travel time can increase to 25–35 minutes due to congestion on Bangerter Highway and Redwood Road. It’s advisable to check real-time traffic updates before starting your journey to account for any delays caused by accidents, roadwork, or heavy traffic.

Traffic impact is a critical consideration for this route. Bangerter Highway is a major thoroughfare in Salt Lake County and often experiences heavy traffic, especially during rush hours. Additionally, construction projects along this corridor can further slow down travel. To mitigate delays, consider using navigation apps that offer alternative routes, such as traveling via 13400 South or 12600 South, though these may add a few extra miles to your trip. Planning your departure time to avoid peak hours can significantly reduce travel time and stress.

Another factor to account for is weather conditions, particularly during winter months when snow and ice can affect road conditions. Reduced speed limits and cautious driving may extend travel time, so it’s important to allocate extra minutes for such scenarios. Additionally, public transportation options, such as UTA buses, may be available but generally take longer than driving due to stops and schedules.

In summary, the driving distance from Daybreak Parkway Station to Riverton Hospital is approximately 8.5 to 9 miles, with an estimated travel time of 15–20 minutes during off-peak hours and 25–35 minutes during peak traffic. By planning ahead, checking real-time traffic updates, and considering alternative routes, you can optimize your journey and arrive at your destination efficiently. Always prioritize safety and adjust your travel plans based on current road and weather conditions.

shunhospital

Public Transit Options: Bus routes, transfer points, total journey duration via UTA services

To travel from Daybreak Parkway Station to Riverton Hospital using UTA (Utah Transit Authority) services, you can utilize a combination of TRAX light rail and bus routes. The journey involves a transfer at a key point, and the total duration varies depending on the time of day and schedule adherence. Here’s a detailed breakdown of the public transit options:

Initial Leg: TRAX Light Rail from Daybreak Parkway Station

Begin by boarding the TRAX Red Line at Daybreak Parkway Station, heading toward the University of Utah. Your destination for the transfer is the Central Pointe Station, which serves as a major hub for UTA services. The TRAX ride from Daybreak Parkway to Central Pointe Station takes approximately 25–30 minutes, covering about 12 miles. Trains run frequently, with intervals of 15–20 minutes during peak hours and slightly longer during off-peak times.

Transfer Point: Central Pointe Station

At Central Pointe Station, you’ll transfer from the TRAX system to a UTA bus. The station is well-designed for easy transfers, with clear signage directing passengers to the bus bays. From here, you’ll board UTA Bus Route 200, which heads south toward Riverton. Ensure you check the departure schedule at the station or use the UTA app to time your transfer efficiently.

Second Leg: UTA Bus Route 200 to Riverton Hospital

Bus Route 200 travels along major thoroughfares, including State Street and 13400 South, toward Riverton. The bus ride from Central Pointe Station to Riverton Hospital takes approximately 40–45 minutes, depending on traffic conditions. The hospital is located near the intersection of 13400 South and 1400 West, and the bus stop is within walking distance of the facility. Buses on this route typically run every 30 minutes, so plan your transfer accordingly.

Total Journey Duration and Tips

The entire journey from Daybreak Parkway Station to Riverton Hospital via UTA services takes roughly 65–75 minutes, including transfer time. To optimize your trip, consider using the UTA GoRide app for real-time updates on TRAX and bus schedules. Additionally, check for any service alerts or detours that may affect your route. For a smoother experience, arrive at the station a few minutes early to account for boarding and transfer times.

Alternative Routes and Considerations

While the TRAX and Bus Route 200 combination is the most direct option, you can also explore other routes depending on your schedule. For instance, you could take the TRAX Blue Line to the Sandy Expo Station and transfer to a different bus route, though this may extend the total journey time. Always verify the latest schedules and routes on the UTA website or app to ensure accuracy.

shunhospital

Walking/Cycling Path: Distance, terrain, safety, and estimated time for active travel options

The walking and cycling path from Daybreak Parkway Station to Riverton Hospital offers a practical and scenic route for those looking to travel actively between these two locations. The total distance is approximately 4.5 miles (7.2 kilometers), making it a manageable journey for both walkers and cyclists. The route primarily follows well-maintained sidewalks, shared-use paths, and quiet residential streets, ensuring a relatively smooth and straightforward journey. Cyclists will appreciate the minimal elevation changes, as the terrain is mostly flat with only slight inclines, allowing for an easy and efficient ride.

In terms of terrain, the path is largely urban, passing through residential neighborhoods and commercial areas. The surface is predominantly paved, with occasional sections of smooth asphalt or concrete, making it suitable for both walking and cycling. Along the way, you’ll encounter a few intersections with traffic lights, which are well-marked and pedestrian/cyclist-friendly. There are also dedicated crosswalks and bike lanes in busier areas, enhancing safety for active travelers. While the route does pass near some main roads, the majority of the path is separated from heavy traffic, providing a safer and more enjoyable experience.

Safety is a key consideration for this route, and it generally scores well in this regard. The path is well-lit in most areas, particularly along main roads and near intersections, making it suitable for early morning or evening travel. There are also several public spaces and parks along the way, which can serve as rest stops or points of interest. However, it’s advisable to remain vigilant, especially when crossing busier streets, and to wear reflective gear or use lights if traveling during low-visibility conditions. For cyclists, wearing a helmet is strongly recommended, and ensuring your bike is equipped with lights and reflectors is essential for safety.

The estimated travel time for this route varies depending on your mode of travel and pace. For cyclists, the journey typically takes between 20 to 30 minutes at a moderate speed of 10 to 15 mph (16 to 24 km/h). Walkers can expect the trip to take around 1.5 to 2 hours at a steady pace of 2.5 to 3 mph (4 to 4.8 km/h). These estimates can be adjusted based on personal fitness levels, rest stops, and traffic conditions. For those looking to combine walking and cycling, using a bike-sharing service or bringing a foldable bike on public transit can be a convenient option to reduce travel time.

Overall, the walking and cycling path from Daybreak Parkway Station to Riverton Hospital is a feasible and enjoyable option for active travelers. With its manageable distance, flat terrain, and safety features, it caters to both commuters and recreational users. Whether you’re looking to incorporate more physical activity into your daily routine or simply enjoy a scenic journey, this route provides a practical and healthy alternative to driving or public transit. Be sure to plan ahead, stay safe, and take advantage of the amenities along the way to make the most of your trip.

shunhospital

Ride-Sharing Costs: Estimated Uber/Lyft fares, availability, and typical trip duration

When traveling from Daybreak Parkway Station to Riverton Hospital, ride-sharing services like Uber and Lyft are convenient options. The distance between these two locations is approximately 10 to 12 miles, depending on the route taken. Based on this distance, the estimated fare for an Uber or Lyft ride typically ranges from $15 to $25 during standard hours. However, prices can fluctuate due to factors such as time of day, traffic conditions, and demand. For instance, during peak hours or in adverse weather, fares may increase due to surge pricing, potentially raising the cost to $30 or more.

Availability of ride-sharing services in this area is generally reliable, especially during daytime hours. Both Uber and Lyft operate extensively in the Salt Lake County region, including the Daybreak and Riverton areas. To ensure a ride is available, it’s advisable to check the app 10–15 minutes before your desired departure time. During early mornings or late nights, availability may decrease slightly, so scheduling a ride in advance could be beneficial.

The typical trip duration from Daybreak Parkway Station to Riverton Hospital is 15 to 25 minutes, depending on traffic. The most direct route usually involves taking Bangerter Highway, which is a major thoroughfare connecting the two locations. However, during rush hours (typically 7–9 AM and 4–6 PM), travel time can extend to 30 minutes or more due to congestion. It’s important to factor in this variability when planning your trip, especially if you have a time-sensitive appointment at the hospital.

To minimize costs and ensure a smooth ride, consider using the app’s fare estimate feature before booking. Both Uber and Lyft allow users to input their starting point and destination to get a real-time fare quote. Additionally, opting for shared rides (e.g., Uber Pool or Lyft Shared) can reduce costs by up to 50%, though this may add a few minutes to your trip duration. For those prioritizing speed and convenience, selecting a standard or premium ride option is recommended.

Lastly, keep in mind that ride-sharing fares do not typically include gratuity. Tipping your driver 15–20% is customary and can be done directly through the app. By planning ahead and understanding these factors, you can make an informed decision about using Uber or Lyft for your trip from Daybreak Parkway Station to Riverton Hospital.

shunhospital

Nearest Landmarks: Key locations en route for navigation and reference points

When traveling from Daybreak Parkway Station to Riverton Hospital, several key landmarks and reference points can help you navigate the route efficiently. The distance between these two locations is approximately 10 miles, depending on the route taken. Starting from Daybreak Parkway Station, located in the Daybreak community of South Jordan, Utah, you’ll head east on Mountain View Corridor. One of the first notable landmarks you’ll encounter is the Mountain View Corridor Interchange, a major intersection that connects to Bangerter Highway (SR-154). This interchange is a crucial reference point as it marks the transition from the quieter residential area of Daybreak to the busier highway system.

Continuing east on Bangerter Highway, you’ll pass by The District shopping center, a large retail complex on the south side of the road. This landmark is easily recognizable due to its size and the variety of stores and restaurants it houses. Shortly after passing The District, you’ll approach the intersection of Bangerter Highway and Redwood Road (SR-68). This intersection is another key reference point, as it provides access to multiple routes leading toward Riverton Hospital. Turning north onto Redwood Road, you’ll begin the final leg of the journey.

As you head north on Redwood Road, you’ll pass Jordan Valley Medical Center West Valley Campus on your left, a prominent healthcare facility that serves as a clear indicator you’re nearing the Riverton area. Further north, you’ll cross over the Jordan River, a natural landmark that signifies you’re entering the heart of Riverton. Shortly after crossing the river, you’ll see Riverton City Park on your right, a large recreational area that is hard to miss. This park is a useful reference point as it is located just a few blocks south of Riverton Hospital.

The final stretch of the route will take you past Riverton City Hall, located on your right at the intersection of Redwood Road and 12800 South. This government building is a clear landmark that signals you’re very close to your destination. From here, Riverton Hospital is just a few blocks north on Redwood Road. The hospital itself is a large, modern facility situated on the east side of the road, making it easily identifiable. These landmarks—from the Mountain View Corridor Interchange to Riverton City Hall—provide clear navigation points to ensure a straightforward journey from Daybreak Parkway Station to Riverton Hospital.

Frequently asked questions

The distance from Daybreak Parkway Station to Riverton Hospital is approximately 10 miles by car, depending on the route taken.

The estimated travel time is around 15-20 minutes by car, depending on traffic conditions.

Yes, public transportation options are available, but they may involve transfers. The trip typically takes 45-60 minutes using buses operated by the Utah Transit Authority (UTA).

Written by
Reviewed by
Share this post
Print
Did this article help you?

Leave a comment