Jordan Ellis
Philips hospital TVs can be auto-programmed to scan for channels. This can be done by pressing the 'Menu' button on the remote control, selecting 'Installation', 'Autoprogram', and then 'Start Now'. You then select 'Cable' or 'Antenna' and press the 'Cursor' button. If you select 'Antenna', the TV will detect antenna signals and search for NTSC and ATSC channels in your area. If you select 'Cable', the TV will detect signals supplied by cable and search for NTSC, ATSC, and QAM-modulated channels. Once you've made your selection, press 'OK' to start the installation. When the autoprogramming is complete, a 'Channel search completed' message will appear, and you can follow the on-screen instructions to finish the installation.
| Characteristics | Values |
|---|---|
| When to use auto program | When you are using an antenna or a direct cable connection (i.e. not using a cable or satellite box) |
| What auto program does | Scans your antenna or cable connection for available channels and stores them in the TV's memory |
| How to auto program | Press the 'Menu' button on the remote control, select 'Installation', then 'Autoprogram', then 'Start Now'. Select 'Cable' or 'Antenna' and press 'OK' to start the installation. |
Explore related products
What You'll Learn
Press the 'Menu' button on the remote control
Press the Menu button on the remote control to access the main menu. You will see the settings menu on the screen. From the settings menu, select 'TV menu' and press the cursor right. Now, use the up and down cursor to select 'Installation' and press the cursor right.
If any of the channels are locked, the screen will prompt you to enter your PIN code to enter the Installation menu. Once you enter the correct PIN, you will be taken to the Installation menu. Here, use the cursor to select 'Channels' and press the cursor right to enter the Channels menu.
In the Channels menu, select 'Autoprogram' and press the cursor right to enter the Autoprogram menu. Now, you will be asked to select 'Cable' or 'Antenna'. If you select Antenna, the TV will detect antenna signals and search for NTSC and ATSC channels available in your local area. If you select Cable, the TV will detect cable company-supplied signals and search for NTSC, ATSC, and QAM-modulated channels available in your area.
After you have made your selection, press 'OK' to start the installation.
Shower Shoes: Hospital Stay Must-Have?
You may want to see also
Explore related products
Select 'Installation'
To select "Installation" during the auto-programming of a Philips TV, start by pressing the "Menu" button on the remote control to display the settings menu. Then, select "TV Menu" in the settings menu and press the cursor right. Next, press the cursor up or down to select "Installation" and press the cursor right.
If any of the channels are locked, the screen will prompt you to enter your PIN code to enter the Installation menu. Once you've entered the correct PIN, press the cursor up or down to select "Channels" in the Installation menu and press the cursor right to enter the Channels menu.
Now, you can select "Autoprogram" in the Channels menu and press the cursor right to enter the Autoprogram menu. Here, you'll be able to choose between "Antenna" and "Cable" connections. If you select "Antenna," the TV will detect antenna signals and search for available NTSC and ATSC channels in your area. On the other hand, selecting "Cable" will make the TV detect cable company-supplied signals and search for cable TV channels, including NTSC, ATSC, and QAM-modulated options.
After making your selection, press "OK" to start the installation. A message will appear asking you to enter your PIN code if you have locked channels. Enter your PIN code to complete the installation. Once the autoprogramming is finished, a “Channel search completed” message will appear. Simply follow the on-screen instructions to wrap up the installation.
INR Testing Frequency: Hospital Patient Monitoring
You may want to see also
Explore related products
Select 'Autoprogram'
To select Autoprogram on a Philips hospital TV, follow these steps:
Firstly, press the Menu button on your remote control. From the settings menu, select TV Menu and press the right cursor button. Next, use the up or down cursor buttons to select Installation and press the right cursor button again.
If any of the channels are locked, you will be prompted to enter your PIN code at this point. Once you have entered your PIN, press the up or down cursor buttons to select Channels in the Installation menu. Press the right cursor button to enter the Channels menu.
Now, select Autoprogram and press the right cursor button to enter the Autoprogram menu. Here, you will be asked to select either Antenna or Cable. If your TV is connected to an antenna, select Antenna, and the TV will detect antenna signals and search for available NTSC and ATSC channels in your local area. If your TV is connected to cable, select Cable, and the TV will detect cable company-supplied signals and search for available NTSC, ATSC, and QAM-modulated channels.
After making your selection, press the OK button to start the installation. Once Autoprogramming is complete, a Channel search completed message will appear, and you can follow the on-screen instructions to finish the installation.
Johns Creek Hospital: How Far from Emory?
You may want to see also
Explore related products
Select 'Antenna' or 'Cable'
To auto-program a Philips TV, you must first select whether you are connecting to an antenna or cable. This is because the TV detects signals differently depending on the type of connection.
Firstly, press the 'Menu' button on your remote control. Then, select 'Installation' and press the cursor right. Next, select 'Channels' in the Installation menu and press the cursor right to enter the Channels menu. Now, select 'Autoprogram' in the Channels menu and press the cursor right to enter the Autoprogram menu.
Here, you will be given the option to select 'Antenna' or 'Cable'. If you select 'Antenna', the TV will detect antenna signals and search for NTSC and ATSC channels available in your local area. If you select 'Cable', the TV will detect signals supplied by your cable company and search for NTSC, ATSC, and QAM modulated channels available in your area.
It is important to note that if you have locked channels, you will be prompted to enter your PIN code before you can access the Installation menu. Additionally, ensure that your incoming cable or antenna cable is connected to the correct input ('TV Antenna' and/or 'SAT').
Keeping Patients Occupied: Creative Ways to Pass Time in Hospital
You may want to see also
Explore related products
Press 'OK' to start installation
To auto-program a Philips TV, you must first ensure that the TV is connected to an antenna or cable. The auto-program feature scans your antenna or cable connection for available channels and stores them in the TV's memory.
Now, to program your Philips hospital TV, follow these steps:
Firstly, press the 'Menu' button on your remote control. Then, select 'Installation' by using the cursor buttons to navigate through the menu. Press the 'OK' button to confirm your selection.
Next, select 'Autoprogram' or 'Auto Program' from the menu, again using the cursor buttons to navigate. Press 'OK' to confirm.
Now, you will need to select your connection type. Choose 'Antenna' or 'Cable' in the Installation mode. If you select 'Antenna', the TV will detect antenna signals and search for available antenna TV channels in your local area. If you select 'Cable', the TV will detect signals supplied by your cable company and search for available cable TV channels. Press 'OK' to confirm your connection type.
Finally, press 'OK' to start the installation. Your Philips TV will now begin the autoprogramming process, which may take some time. Once the autoprogramming is complete, a message will appear on the screen, and you can follow the on-screen instructions to finish the installation.
Note: If any of the channels are locked, you will need to enter your PIN code to access the Installation menu.
Hospital Rush: Usher's Health Scare Explained
You may want to see also
Frequently asked questions
First, press the 'Menu' button on the remote control to access the main menu. Then, select 'Installation' and choose 'Autoprogram'. Next, select 'Cable' or 'Antenna' and press 'OK' to start the installation. Once autoprogramming is complete, a ''Channel search completed' message will appear.
The auto program feature scans your antenna or cable connection for available channels and stores them in the TV's memory.
You only need to auto program channels on your Philips hospital TV if you are using an antenna or a direct cable connection. If you are using a cable or satellite box, you do not need to auto program channels.
If you have locked channels on your TV, a message will appear during autoprogramming asking you to enter your PIN code. Enter your PIN code to complete the installation.
